TRETTITRE is pushing a TTT hardware line that treats physical media like room furniture instead of a black box on a shelf. The headline piece is the TTT-LP3: a belt-drive vinyl player with a CNC-machined aluminium frame, a backlit diffuser that washes the body in soft light, wall-mount hardware, a carry strap, and onboard battery so you can lift it off the bracket and listen elsewhere. Wireless audio goes out over Qualcomm Bluetooth 5.3 (including aptX HD and aptX Adaptive in the published stack); wired fallback is a 3.5 mm line out. I have not heard a production unit- this is an intro from TRETTITRE’s own campaign and storefront story, not a listening review. Official hub: trettitre.com; the current Kickstarter campaign for the line is linked from that site (and below).
TTT-LP3: turntable as ambient object
TRETTITRE sells the LP3 as part light fixture, part record player. A diffused panel behind the chassis spreads glow across the metal body; you can run effects or leave it as a soft lamp even when the platter is still. That is the clearest break from “hide the hi-fi” minimalism — the unit is meant to read from across the room.
Mounting is deliberate: a hidden bracket on the back lets you hang it vertically (record facing the room like a poster) or in a more traditional horizontal attitude. A silicone-and-leather-style carry strap at the top sells the idea that you lift it off the wall for kitchen, patio, or hotel-table duty- closer to portable lifestyle audio than a 15 kg isolation platform deck.
For how tonearm geometry still shapes tracking on any table, our tonearm explainer is the right background; the LP3 is the opposite end of the hobby from a fully manual S-arm you align with a protractor.
Playback, Bluetooth & power
TRETTITRE describes a self-balancing tonearm that sets tracking force when power comes on: you place the record, lower the stylus, and avoid the full counterweight ritual. That targets buyers who want tactile vinyl without a setup worksheet. Speeds are 33 and 45 with a manual trim dial for small pitch tweaks (the campaign copy cites roughly ±0.5 % — handy for older pressings).
Wireless output uses Bluetooth 5.3 with SBC, aptX, aptX HD, and aptX Adaptive. For a wired speaker or desk rig, there is a 3.5 mm analogue output.
Battery life is quoted around 6 hours of vinyl playback, or about 3 hours if you treat the unit more like a portable lamp — real-world hours will depend on brightness and volume. Published physicals from the campaign materials include about 342 × 233 × 87 mm, 1430 g, and an Audio-Technica AT3600L moving-magnet cartridge in the integrated headshell-style path TRETTITRE shows.
If you are new to the whole groove-to-speaker chain, how vinyl playback works still frames what a deck like this is doing under the styling.
TTT-DP3, TTT-CP3 & TTT-W rack
The same TTT story covers a Bluetooth CD player (TTT-DP3) with a rotating transparent magnetic lid and a compact OLED status display, and a Bluetooth cassette deck (TTT-CP3) with metal housing and piano-style mechanical keys. Both are pitched as movable devices with onboard power- the line is consistent: media objects you relocate, not rack gear you bolt down once.
The TTT-W wall rack is the structural glue: magnetic alignment, geometric metal rails, and wireless charging (campaign copy cites about 5–10 W with USB-C input) so the LP3 can sit on the wall without a dangling power cord. Two rack layouts are shown in the materials — a compact T-shape and a wider modular panel for multiple players.
Speakers & add-ons
Beyond the three playback boxes, TRETTITRE’s campaign bundles in ecosystem pieces: TreSound1 (larger sculptural speaker with quoted 2 × 30 W plus 60 W sub channel), a smaller TreSound Mini, TTT-E3 planar IEMs, and a slim side table. Treat the watt and driver claims as manufacturer copy until measured- the interesting part for Slow HiFi readers is whether the industrial design language stays coherent when you mix-and-match.
Crowdfunding reality check
Kickstarter is not retail. Ship dates slip, specs tweak, and early-bird tiers sell out. Before you back, read the risks section, check charger compatibility for your region, and decide whether you want the LP3 alone, a bundle with CD / tape, or the wall rack for the clean wireless-charge install.
If you need a proven automatic starter deck with a longer service track record, something like the AT-LP60X is a different conversation: less art piece, more “just play records” appliance. The TTT-LP3 is for buyers who already like the object on the wall as much as the cartridge in the groove.
FAQ
Is the TTT-LP3 a concept or a shipping product?
TRETTITRE is funding it through a public Kickstarter campaign with stated delivery windows per tier. Until units land with reviewers, treat sound and build as promised, not proven.
Can I use it like a normal turntable on a shelf?
Yes — the wall bracket is optional in practice if you place it on a stable surface. The design still assumes you might lift and move it; isolation and footfall will not behave like a heavy plinth on a dedicated stand.
Do I need the TTT-W rack?
No, but the rack is how TRETTITRE shows cable-free wall power via wireless charging. Without it, plan on charging the unit the way the campaign specifies (check the pack-in list for your tier).
Is Bluetooth good enough for vinyl?
It is a convenience path to speakers or headphones across the room. Purists will still prefer a wired analogue or digital chain; the LP3 keeps a 3.5 mm output for that reason.
